Frakt från 69:-      Leverans 1-3 dagar 

355ci Crate Engine Long Block

BluePrint Engines
58 290 kr
Vikt: 230 kg
Finns i lager för omgående leverans
Beställningsvara
Endast få kvar i lagret (0 st)
Sorry, vi har inte den här produkten i lager. Kontakta oss, vi kanske kan lösa det.
Bevaka produkt

Ange din e-postadress nedan så meddelar vi dig när produkten finns i lager! Din e-postadress sparas i upp till 180 dagar.

Produktbeskrivning:

BluePrint Engines 355CI Crate Engine | Small Block GM Style | Long Block | Aluminum Heads | Flat Tappet Cam

  • HP & Torque: 375 HP / 400 FT LBS
  • Compression Ratio: 10.0:1
  • Aluminum Heads
  • Flat Tappet Cam
  • Cast Steel Crank
  • Hypereutectic Pistons

Block:

  • Hand picked seasoned block
  • Square and parallel decked
  • Align honed main bearing bore
  • Cylinders honed on computer controlled machine to within .0002 straightness and roundness
  • Cylinders are sonic tested for thickness
  • 4-Bolt Main
  • 4.000″ Bored .040″ Over
  • 1-Piece Rear Main Seal
  • Mech fuel pump provision: Yes
  • Passenger Side Dipstick
  • Drilled and tapped for clutch linkage

Rotating Assembly:

  • Cast steel crankshaft
  • 3.480″ Stroke
  • OEM type 5.700″ connecting rods w/ 150,000 psi bolts
  • Hypereutectic pistons
  • Internal Front/ External Rear

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - H8002K
  • 64cc chamber
  • 2.02″ intake/1.60″ exhaust valves
  • 195cc intake/75cc exhaust runners

Cam Specs:

  • Cam Type: Flat Tappet
  • .480 Intake .486 Exhaust
  • 229 Intake / 230 Exhaust duration
  • @ .050

Ignition Timing:

  • 34 Degrees Total at 3500 RPM

Also Includes:

  • New valve covers
  • Oil pan
  • Timing cover
  • Brass freeze plugs
  • Dyno test results shipped with engine

Notes:

  • Picture shown with optional tall, perimeter bolt valve covers.
  • This engine requires a non weighted harmonic balancer, and a late 350 (for 1 piece rear seal) weighted flexplate/flywheel.
  • If you are using an automatic transmission, BluePrint Engines recommends a 2000-2400 rpm stall converter.
  • Recommended spark plugs are Champion 792 with .045″″ gap
  • Not for use in pollution controlled vehicles.
  • This engine is not compatible with factory fuel injection.



Artikelnummer:
BPEBP35513CT1

Bilvård
DePalma Workwear

Produkten har blivit tillagd i varukorgen