Trygg E-Handel

Performer 390 Intake Manifold for Ford FE, Satin Finish

Edelbrock
5 289 kr
Vikt: 13.2 kg
Finns i lager för omgående leverans
Kontakta oss för aktuell leveranstid!
Endast få kvar i lagret (0 st)
Ej i lager just nu. Men kontakta oss så tar vi snabbt hem den åt dig.
Bevaka produkt

Ange din e-postadress nedan så meddelar vi dig när produkten finns i lager! Din e-postadress sparas i upp till 180 dagar.

Produktbeskrivning:

Edelbrock grundades av Vic Edelbrock 1938 och är idag en av branschens ledande aktörer inom prestandadelar till amerikanska bilar. Alla produkter är designade, tillverkade och testade av Edelbrock i södra Kalifornien, USA.

Edelbrock Performer 390 Intake Manifold for 1958-1976 Ford FE Big-Block V-8 is Designed for Street 332-428 c.i.d. Engines with Medium or Low-Rise Cylinder Heads, Accepts (4150-Style) Edelbrock Carb. Non-EGR

Edelbrock part #2105 Performer 390 intake manifold is designed for street 332-352-360-390-406-410-427-428 c.i.d. Ford V8's with medium- or low-rise cylinder heads. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. Manifold not equipped with EGR; will not accept stock Motorcraft spread-bore carburetor or fit heavy-duty 361 c.i.d. and 391 c.i.d. Ford truck V8's.

Specifikationer
Application
Application Specific
UPC
00085347021055
Series
Performer
Grade Type
Performance
Gasket Or Seal Included
No
Vehicle Model
Ford
Warranty
12 Months
Ec Basic Operating Rpm Range
Idle-5500 RPM
Installation Notes
  • Recommended intake gasket: Edelbrock #7224 or Fel-Pro #1247; Manifold height: A-4.35", B-5.50" (same as stock); Carb pad height: 4.92"; Carb recommendations: Edelbrock Thunder Series AVS or Performer Series Carb, 600-800cfm. For automatic transmissions use #1483 or #1844.; Port exit dimensions: 1.06" x 1.75"; Will not accept stock Motorcraft spread-bore carburetor or fit heavy-duty 361 & 391 c.i.d. Ford truck V8s.; Due to the design of Performer manifolds, the throttle and kickdown bracket on some vehicles may require modification to fit.; Due to the possible lack of hood clearance, you may not be able to use the OEM water heater space block between the intake manifold and carburetor.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Center Maximum Height
4.920 in
CNC Ported
No
Finish
Satin
Front Maximum Height
4.350 in
Material
Aluminum
Rear Maximum Height
5.500 in
Single Or Dual Plane Type
Dual



Artikelnummer:
EDL2105

Recensioner

Otroligt snabb leverans.
Bilvård

Produkten har blivit tillagd i varukorgen